Shift: 1st and 2nd shifts

Ensures effective preventative maintenance plans and schedules for all facility equipment and systems.

Diagnoses Materials Handling Equipment and Automated Picking System-related error conditions occurring in the Distribution Center and repairs appropriately.

Oversees any maintenance, modifications, and/or system upgrades of Materials Handling Equipment and Automated Picking System controls.

Assesses the efficiency of materials handling equipment and automated picking systems and defines necessary modifications.

Performs routine preventive maintenance tasks to ensure continued productivity with warehouse operations.

Maintains CMMS/EAM system on repairs required and performed on equipment in the Distribution Center.

Manages the inventory of spare parts.

Must be willing to work extended hours, as needed, in order to meet productivity goals.

Performs related duties as assigned.

Requires some technical vocational training, or equivalent combination of experience and education. Normally requires at least two (2) years related and progressively responsible experience; strong electrical background preferred.

1. Strong technical and operational knowledge of mechanical, electrical and electronic equipment and systems. Strong aptitude for repair and maintenance activities.

2. Ability to read and interpret CAD layouts, illustrated parts breakdown (IPB) diagrams, and electrical circuitry diagrams and drawings.

3. Ability to diagnose and repair electrical and mechanical issues. Issues may include the testing, replacement or repair electrical systems including three phase or single phase electrical systems up to 600volts, AC or DC motors, power supplies, frequency drives, servo drives, transformers, motor starters, proximity sensors, encoders, photo eyes, programmable logic controllers (PLC), HMI’s, PLC Inputs/Outputs.

4. Ability to test equipment and instrumentation system including electrical, pneumatic, hydraulic, refrigeration, and water treatment chemicals.

5. Knowledge of programmable logic controllers (PLCs) preferred. Ability to read electrical schematic, wiring diagrams, and PLC ladder and block logic. Ability to load programs or configure PLC’s, HMI, scanners

6. Ability to program basic changes to PLC controllers including modifying timing, adding alarms and logic for additional inputs or outputs. Ability to properly wire additional devices to PLC’s and other controllers.

7. Working knowledge of computer systems and personal computers. Computer hardware experience including the installation and setup of hard drives, RAM, network cards, monitor cards, and motherboards.

8. Computer software experience including MS office (Excel, Word, IM), MHE software such as RSLogix, Sort Director, GSMi, IPoint, Flex Sort, etc.

9. Technical knowledge and skills include the diagnosing of electrical control issues to a component level. Component level skillset includes the diagnosing of capacitors, inductors, diodes, LED, and transistors. Ability to diagnose pressure transducers, flow meters, photo voltaic sensors, bridge and full wave rectifiers.

10. Positions at this level are generally fully functioning specialists in a PLC/Electrical control trade area.

11. Ability to troubleshoot communication issues with devices connected to the MHE network or other networks such as PROFIBUS, BACNET, LONWORKS, PROFINET, CAN-BUS, ASI, Etc. Skills to include an understanding of device IP addressing, network switches, etc.

12. Ability to operate and diagnose all chill water plant systems including chillers, cooling towers, boilers, pumps , BAS, HVAC, water treatment

13. Strong analytical skills; ability to resolve issues effectively and efficiently. Ability to identify facilities-related maintenance problems and implement standard courses of action to resolve problems within established project timeframes and administrative and technical requirements.

14. Technical knowledge and skills include the diagnosing of electrical Controls issues to a component level. Component level skillset includes the diagnosing of capacitors, inductors, diodes, LED, and transistors. Ability to diagnose pressure transducers, flow meters, photo voltaic sensors, bridge and full wave rectifiers.

15. Ability to program basic changes to PLC Controllers including modifying timing, adding alarms and logic for additional inputs or outputs. Ability to properly wire additional devices to PLC’s and other Controllers.

16. Ability to troubleshoot communication issues with devices connected to the MHE network or other networks such as Profibus. Skills to include an understanding of device IP addressing, network switches, etc.

17. Ability to operate and diagnose all chill water plant systems including chillers, cooling towers, boilers, pumps , BAS, HVAC, water treatment

18. Ability to mentor other technicians.

19. Ability to communicate effectively both orally and in writing

20. Strong interpersonal skills

21. Strong organizational skills; attention to detail

#LI-NR1

What AmerisourceBergen offers

We offer a competitive total rewards package which includes benefits and compensation. Our commitment to our eligible population of team members includes benefit programs that are comprehensive, affordable, diverse, and designed to meet the needs of our team members’ and their families. Some of these programs include paid time off including paid parental leave, access to retirement savings vehicles, medical, dental, vision, and life insurance options, an employee stock purchase program, and other financial, health, and well-being focused benefits.

Because we take a balanced, global approach to our benefits, benefit offerings may vary by location, position, and/or business unit. Some benefits are company-paid, while others are available through team member contributions. For details visit https://www.virtualfairhub.com/amerisourcebergen.

Schedule

Full time

$56,400 - 80,630

*This Salary Range reflects a National Average for this job. The actual range may vary based on your locale. Ranges in Colorado/California/Washington State-specific locations may be up to 10% lower than the minimum salary range, and 12% higher than the maximum salary range.

Affiliated Companies:

Affiliated Companies: AmerisourceBergen Services Corporation

Equal Employment Opportunity

AmerisourceBergen is committed to providing equal employment opportunity without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, veteran status or membership in any other class protected by federal, state or local law.

The company’s continued success depends on the full and effective utilization of qualified individuals. Therefore, harassment is prohibited and all matters related to recruiting, training, compensation, benefits, promotions and transfers comply with equal opportunity principles and are non-discriminatory.

AmerisourceBergen is committed to providing reasonable accommodations to individuals with disabilities during the employment process which are consistent with legal requirements. If you wish to request an accommodation while seeking employment, please call 888.692.2272 or email hrsc@amerisourcebergen.com. We will make accommodation determinations on a request-by-request basis. Messages and emails regarding anything other than accommodations requests will not be returned

Requires some technical vocational training, or equivalent combination of experience and education. Normally requires at least two (2) years related and progressively responsible experience; strong electrical background preferred.

1. Strong technical and operational knowledge of mechanical, electrical and electronic equipment and systems. Strong aptitude for repair and maintenance activities.

2. Ability to read and interpret CAD layouts, illustrated parts breakdown (IPB) diagrams, and electrical circuitry diagrams and drawings.

3. Ability to diagnose and repair electrical and mechanical issues. Issues may include the testing, replacement or repair electrical systems including three phase or single phase electrical systems up to 600volts, AC or DC motors, power supplies, frequency drives, servo drives, transformers, motor starters, proximity sensors, encoders, photo eyes, programmable logic controllers (PLC), HMI’s, PLC Inputs/Outputs.

4. Ability to test equipment and instrumentation system including electrical, pneumatic, hydraulic, refrigeration, and water treatment chemicals.

5. Knowledge of programmable logic controllers (PLCs) preferred. Ability to read electrical schematic, wiring diagrams, and PLC ladder and block logic. Ability to load programs or configure PLC’s, HMI, scanners

6. Ability to program basic changes to PLC controllers including modifying timing, adding alarms and logic for additional inputs or outputs. Ability to properly wire additional devices to PLC’s and other controllers.

7. Working knowledge of computer systems and personal computers. Computer hardware experience including the installation and setup of hard drives, RAM, network cards, monitor cards, and motherboards.

8. Computer software experience including MS office (Excel, Word, IM), MHE software such as RSLogix, Sort Director, GSMi, IPoint, Flex Sort, etc.

9. Technical knowledge and skills include the diagnosing of electrical control issues to a component level. Component level skillset includes the diagnosing of capacitors, inductors, diodes, LED, and transistors. Ability to diagnose pressure transducers, flow meters, photo voltaic sensors, bridge and full wave rectifiers.

10. Positions at this level are generally fully functioning specialists in a PLC/Electrical control trade area.

11. Ability to troubleshoot communication issues with devices connected to the MHE network or other networks such as PROFIBUS, BACNET, LONWORKS, PROFINET, CAN-BUS, ASI, Etc. Skills to include an understanding of device IP addressing, network switches, etc.

12. Ability to operate and diagnose all chill water plant systems including chillers, cooling towers, boilers, pumps , BAS, HVAC, water treatment

13. Strong analytical skills; ability to resolve issues effectively and efficiently. Ability to identify facilities-related maintenance problems and implement standard courses of action to resolve problems within established project timeframes and administrative and technical requirements.

14. Technical knowledge and skills include the diagnosing of electrical Controls issues to a component level. Component level skillset includes the diagnosing of capacitors, inductors, diodes, LED, and transistors. Ability to diagnose pressure transducers, flow meters, photo voltaic sensors, bridge and full wave rectifiers.

15. Ability to program basic changes to PLC Controllers including modifying timing, adding alarms and logic for additional inputs or outputs. Ability to properly wire additional devices to PLC’s and other Controllers.

16. Ability to troubleshoot communication issues with devices connected to the MHE network or other networks such as Profibus. Skills to include an understanding of device IP addressing, network switches, etc.

17. Ability to operate and diagnose all chill water plant systems including chillers, cooling towers, boilers, pumps , BAS, HVAC, water treatment

18. Ability to mentor other technicians.

19. Ability to communicate effectively both orally and in writing

20. Strong interpersonal skills

21. Strong organizational skills; attention to detail

#LI-NR1